More Pixel Protocols

LED Pixel Protocol MBI6024

Overview

MBI6024 is a PWM-embedded, 3 × 4-channel constant-current sink driver designed by Macroblock Inc. of Hsinchu, Taiwan. It is intended for LED strips, mesh displays and architectural lighting applications.

Unlike addressable LEDs that integrate the control circuit and LEDs into a single package, MBI6024 is a standalone driver IC connected to separate LEDs. This gives fixture manufacturers greater flexibility when selecting LED packages and designing custom 12-channel output arrangements.

The driver supports 16-bit grayscale mode, where Macroblock’s Scrambled-PWM technology divides the PWM cycle into 64 segments to increase the visual refresh rate while retaining 16-bit grayscale resolution.

Current Control

MBI6024 has the ability to digitally control the current of the connected LEDs. Use the 8-bit current control per colour to lower the brightness without sacrificing resolution, and tune the current of individual colours, allowing for more accurate colour mixing. This individual current control can be set when configuring your PixLite® Mk3 controller.

Note: Advatek Lighting is in no way affiliated with Macroblock Inc.

Specifications

PixLite Mk1

PixLite Mk2

PixLite Mk3

Clock Type

Clocked

Color Resolution

16 Bits

Built-in Gamma Correction

Current Control

Per Color: 8 Bits

Physical Package

SSOP24L / QFN24L

Color Types

RGB

Input Voltage

3.3 - 5V

Output Pixel Voltage

5 - 17V

PWM Rate

11,718Hz

Suitable Camera

Up to 391fps

Redundant Data Line

Colour support: RGB — Yes; RGBW — No; RGB+CCT — No.

Advantages

  • Presence of a clock allows for faster refresh rates
  • Very high PWM rate allows for filming these pixels with cameras up to 391fps
  • 16 bits of data for each color makes diming curves very smooth
  • Phase-inversed clock output is intended to reduce accumulated pulse-width distortion in cascaded devices
  • Three external current-setting resistors allow the fixture designer to select separate current levels for three groups of outputs
  • Supports 3.3 V and 5 V driver supply system

Disadvantages

  • No redundancy in data

PixLite® Support

Are you looking for MBI6024 pixel drivers that work with Art-Net or sACN?

All PixLite® Mk3 products support MBI6024 as an available Pixel IC type, so get in touch with us to find out how the lighting specialists at Advatek can support you in your pixel lighting project